Single Phase to 3 Phase Converter, MY-PS-15 Model, Suitable for 10HP(7.5Kw) 3…

Description

Brand New Single Phase to 3 Phase Converter, MY-PS-15 Model, Suitable for 10HP(7.5Kw) 30 Amp 200-240V 3 Phase Motor, One DPS Should Be Used for One Motor, Input/Output 200V-240V
Manufacturer model:
MY-PS-15
Excellent start-up torque / The size is small & easy to install
The efficiency of our DPS is excellent more than other items
The failure rate is very low
Semi-permanent lifetime
Due to sealed type, very strong against dust, moisture, and heat
Doesn’t make any high frequency
Designed to be non-thermal
3 phase motors can be used at your home or workshop
Description
▷ Before ordering our DPS, you should check the ampere of your motor and purchase the suitable our DPS. And please give us the information about your motor purpose to recommend suitable DPS to you. Also, please note the below points carefully. 1. MY-PS-15 model is best for 10HP motor.(7.5KW, 30 amps) 2. It should only be used for one motor per one DPS. The use of multiple motors is not allowed in our DPS. 3. The input/output voltage of our DPS is 200v~240v. 4. Our DPS is designed to be suitable for use in motor. 5. The efficiency is around 90~95%. 6. The voltage of motor should be 200v~240v. If the voltage of your motor is 380v or 440v, you should change the wire of motor to 200v~240v purpose to connect with output of our DPS. 7. The thickness of wires should be suitable for amperes. 8. Only single phase motor brake is allowed.(Three phase motor brake is not working at our DPS) 9. You could check three phase on the output of DPS when your motor is running. If your motor is not running, you could not check three phase from output of DPS. 10. If your motor has magnetic starter, or electronic switch, or brake, the operating wires of this device should be connected on “U” and “W” of output of our phase converter. Thus, if your motor is not running well or the motor is reversing, you should turn off the power immediately and you have to switch the wires on output(U, V, W) of our phase converter. Actually, when you connect the wires from output of phase converter to your motor, you could succeed in first time, or second time, or third time. A. Detail information 1. Capacity : Suitable for 10HP motor(7.5KW, 30 amps) 2. Frequency : 50/60 Hz 3. Dimension(inch) : 5.7x5x9(WxLxH) 4. Mounting holes : 5Ø 5. Net Weight : 5.2LB 6. Voltage of input and output : 200V – 240V
Shipping and Handling
Please allow 5-7 business days for the package to arrive, regardless of buyer location within the US.
We will provide an online tracking number to you once the item has been shipped.
It may take a few business days for our automated system to process the tracking number onto eBay. However, this will not affect the shipping times.
Return Policy
All our products are brand new and sealed. All items qualify for returns within 30 days of receipt.
Feedback
We take our reputation seriously. If you have any questions or concerns, please contact us and we will respond back to your message within 24 hours.